Products
Products
Easybond Pin Brazing is ideally suited for many applications including continuity bonding between pipes, across flanges, connection of cathodic protection test and current carrying cables and connection of bracelet galvanic anodes etc.
Easybond Pin Brazing is ideally suited for many applications including continuity bonding between pipes, across flanges, connection of cathodic protection test and current carrying cables and connection of bracelet galvanic anodes etc.
The Easybond MKII equipment is very robust, easy to operate, easy to maintain and ideal for on site works.
The Easybond MKII is powered by a 36V DC battery pack (or suitable welding generator when using the generator gun) capable of delivering 240A for use with BAC fused brazing pins, ceramic ferrules and cable lugs.
With the earth device in place the gun trigger is depressed and after approximately 1.5 to 2 seconds the circuit is mechanically broken as the fuse wire breaks, and the brazing pin is held into the molten pool of brazing alloy that rapidly cools into a homogenous and very strong connection.
We can supply all of your Pin Brazing equipment, accessory and spares needs from our stock. We ship worldwide and hold strategic stocks in various territories.
BAC manufacture a range of brazing pins, lugs and bonds suitable for cables from 1mm2 up to 50mm2. All BAC brazing pins are manufactured to the highest standards to ensure a safe, consistent and reliable connection.
All Easybond MK II equipment, consumables and spare parts are normally ex stock and ready for same day delivery at our UK facility and at authorised distributors worldwide.
In order to get the best from your Easybond equipment we would always recommend training for your operatives and technicians. BAC and it’s authorised importers/distributors offer a full service and repair capability for your Easybond equipment
Speed of connection
Takes around 60 seconds for 1 connection.
Low Temperature
The low meting point (650°C) and short brazing time minimise the thermal effects on the steel.
All Weather
Pin brazing can be carried out in the wind rain or snow and damp conditions pose no problem.
Easy to use
Operators can be trained effectively to operate and maintain the equipment in less than one hour.
Versatile
Connections can be made at any orientation on a pipe.
Maintenance
Huge range of spare parts means easy onsite maintenance.
For further information please contact us using the following:
Enquiry FormEmail: sales@bacgroup.com
Phone: +44 (0) 1952 290321
